Installation

DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: INSTALLATION

1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY

(a) Pass the hood lock control cable assembly into the engine compartment.





Text in Illustration





(b) Pass the cable through the upper radiator support.

(c) Engage each clamp shown in the illustration.

(d) Connect the hood lock control cable assembly.





2. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

(a) Connect the hood lock control cable assembly to install the hood lock control lever sub-assembly.





3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Installation

4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Installation

5. INSTALL FRONT DOOR SCUFF PLATE LH Installation

6. INSTALL FRONT FENDER LINER LH

HINT
Use the same procedure for the RH side and LH side Installation.

7. INSTALL FRONT WHEEL LH

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)