Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com
Home >> Toyota >> 2012 >> Avalon V6-3.5L (2GR-FE) >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Dashboard / Instrument Panel >> Service and Repair >> Removal and Replacement >> Installation

Installation





INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD: INSTALLATION

1. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

(a) Engage the 5 pins.





Text in Illustration





(b) Install the 2 bolts [A] and 2 nuts [F].

Bolt A - Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

(c) Engage each clamp.

(d) Connect each connector.

2. CONNECT INSTRUMENT PANEL WIRE ASSEMBLY Installation

3. INSTALL TIRE PRESSURE WARNING ECU Installation

4. INSTALL FRONT PILLAR GARNISH LH Installation

5. INSTALL FRONT PILLAR GARNISH RH Installation

6. INSTALL FRONT STEREO COMPONENT SPEAKER

7. INSTALL NO. 1 SPEAKER HOLE COVER

(a) Engage the 12 claws to install the No. 1 speaker hole cover.





8. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

(a) Engage the 2 clips.

(b) Install the lower center instrument panel finish panel with the 2 screws [E].

9. INSTALL FRONT CONSOLE BOX

(a) Engage the 2 claws.

(b) Install the front console box with the 2 nuts [F] and screw [E].

10. INSTALL CONSOLE BOX ASSEMBLY

(a) Install the console box assembly with the 2 bolts [D] and 2 screws [E].

(b) Connect each connector.

11. INSTALL CONSOLE BOX CARPET

(a) Install the console box carpet.

12. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

(a) Connect each connector.





(b) Engage the 10 clips to install the upper console panel sub-assembly.

(c) Engage the 6 claws to install the upper console box.





13. INSTALL SEAT HEATER SWITCH (w/ Seat Heater System)

(a) Connect the connector.

(b) Engage the 4 claws to install the seat heater switch.





14. INSTALL POSITION INDICATOR HOUSING ASSEMBLY

(a) Engage the 5 claws to install the position indicator housing assembly.





15. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

(a) Turn the shift lever knob clockwise to install the shift lever knob sub-assembly.





16. INSTALL INSTRUMENT SIDE PANEL RH

(a) Engage the claw, 2 clips and 3 guides to install the instrument side panel RH.

17. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH

(a) Engage the 3 claws and clip.

(b) Install the lower instrument panel finish panel RH with the bolt [B] or [C] and 4 screws [E].

18. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

(a) Connect each connector.

(b) Engage the 4 claws and 2 guides to install the No. 2 instrument panel under cover sub-assembly.





19. INSTALL FRONT DOOR SCUFF PLATE RH

20. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

21. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

(a) Engage the 6 claws to install the No. 4 instrument panel register assembly.

22. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

(a) Engage the 4 clips to install the No. 2 instrument cluster finish panel garnish.

23. INSTALL INSTRUMENT SIDE PANEL LH

(a) Engage the 4 claws and 3 guides to install the instrument side panel LH.

24. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY Installation

25. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH

(a) Connect each connector.

(b) Engage the 7 claws and 4 clips.

(c) Engage the 2 claws to connect the room temperature sensor.

(d) Connect the hood lock control cable.

(e) Install the lower instrument panel finish panel LH with bolt [B] or [C] and screw [E].





(f) Close the cover as shown in the illustration.

26. INSTALL FRONT DOOR SCUFF PLATE LH

27. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

28. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

(a) Engage the 4 clips to install the No. 1 instrument panel register assembly.

29. INSTALL COMBINATION METER ASSEMBLY Installation

30. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

(a) Engage the 3 claws.

(b) Install the No. 2 instrument cluster finish panel subassembly with the 2 screws [E].

31. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY

(a) Connect each connector.

(b) Engage the 8 clips to install the instrument panel sub-assembly.

32. INSTALL INSTRUMENT PANEL FINISH PLATE (w/o Smart Key System)

(a) Install the instrument panel finish plate.

33. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

(a) Engage the 2 clips to install the No. 1 instrument cluster finish panel garnish.





34. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

(a) Connect each connector.

(b) Engage the 9 claws and 2 clips to install the center instrument cluster finish panel sub-assembly.

35. INSTALL INTEGRATION CONTROL AND PANEL WITH NAVIGATION RECEIVER ASSEMBLY (w/ Navigation System) Installation

36. INSTALL INTEGRATION CONTROL AND PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System) Installation

37. INSTALL CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL

(a) Engage the 10 clips to install the center upper instrument cluster finish panel.





38. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY Installation

39. INSTALL UPPER STEERING COLUMN COVER Installation

40. INSTALL LOWER STEERING COLUMN COVER Installation

41. ADJUST SPIRAL CABLE

42. INSTALL STEERING WHEEL ASSEMBLY Installation

43. INSTALL STEERING PAD Installation

44. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

45. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

46. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

47. INSPECT STEERING PAD

Steering Pad

48. INSPECT SRS WARNING LIGHT

Diagnosis System
pro multis · About Operation CHARM