Installation

METER: COMBINATION METER: INSTALLATION

1. INSTALL COMBINATION METER ASSEMBLY

(a) Connect the connector.

(b) Install the combination meter assembly with the 4 screws.

2. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

3. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY Installation

4. INSTALL INSTRUMENT PANEL FINISH PLATE (w/o Smart Key System) Installation

5. INSTALL CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.