Installation

2AZ-FXE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

(a) Install a new gasket onto the engine coolant temperature sensor.





(b) Using SST, install the engine coolant temperature sensor.

SST : 09817-33190

Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

(c) Connect the engine coolant temperature sensor connector.

2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY Installation

3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY Installation

4. INSTALL AIR CLEANER INLET ASSEMBLY Installation

5. ADD COOLANT (for Engine) Coolant (for Engine)

6. INSPECT FOR COOLANT LEAK (for Engine) Testing and Inspection

7. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation