Removal

FRONT SUSPENSION: FRONT SUSPENSION MEMBER: REMOVAL

FRONT SUSPENSION: FRONT SUSPENSION MEMBER: REMOVAL

1. REMOVE ENGINE WITH TRANSMISSION ASSEMBLY
HINT: Remove the engine with transmission assembly. Removal

2. INSTALL ENGINE HANGERS Removal

3. REMOVE OIL LEVEL DIPSTICK
4. REMOVE OIL LEVEL DIPSTICK GUIDE Removal

5. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY LH Removal

6. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY RH Removal

7. REMOVE NO.1 EXHAUST MANIFOLD HEAT INSULATOR Removal

8. REMOVE NO.2 EXHAUST MANIFOLD HEAT INSULATOR Removal

9. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY Removal

10. REMOVE FRONT ENGINE MOUNTING INSULATOR Removal

11. REMOVE FRONT STABILIZER BAR






(a) Remove the 2 nuts and the front stabilizer bar.
HINT: If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.

12. SEPARATE FRONT LOWER SUSPENSION ARM ASSEMBLY LH






(a) Remove the 2 bolts, 2 washers, 2nuts and separate the front lower suspension arm assembly LH.
13. SEPARATE FRONT LOWER SUSPENSION ARM ASSEMBLY RH
HINT: Perform the same procedure as the LH side.

14. REMOVE POWER STEERING LINK ASSEMBLY






(a) Remove the 2 bolts, 2 washers, 2 nuts, and the power steering link assembly from the front suspension crossmember.
HINT: Remove the power steering link assembly together with the front lower suspension arm assembly.