Battery Junction Box (BJB)

Battery Junction Box (BJB)
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures

Removal

NOTE:
Removal steps in this procedure may contain installation details.

NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.

All vehicles
For additional information, refer to Specifications
For additional information, refer to Central Junction Box (CJB) Central Junction Box (CJB)
For additional information, refer to Instrument Panel Upper Section Instrument Panel Upper Section













Torque to: 10 Nm

















Torque to: 10 Nm





Vehicles with auxiliary heating









All vehicles









For additional information, refer to Anti-Theft Alarm Horn with Integral Battery Service and Repair









Torque to: 10 Nm





WARNING: Be prepared to collect escaping fluid.





NOTE:
LH illustration shown, RH is similar.
1 Remove the front RH wheel arch liner.
For additional information, refer to Fender Splash Shield Fender Splash Shield

Vehicles with fuel fired booster heater
For additional information, refer to Fuel Fired Booster Heater - 2.0L GTDI

All vehicles













WARNING: Be prepared to collect escaping fluid.





For additional information, refer to Secondary Bulkhead Center Panel - 2.0L GTDI Service and Repair
For additional information, refer to Anti-Lock Brake System (ABS) Module Service and Repair
For additional information, refer to Brake Booster Service and Repair









Torque to: 10 Nm









Torque to: 25 Nm





Torque to: 10 Nm









Torque to: 10 Nm





Torque to: 10 Nm













Torque to: 10 Nm









WARNING: Be prepared to collect escaping fluid.

CAUTION: If brake fluid is spilt on the paintwork, the affected area must be immediately washed down with cold water.

Torque to: 14 Nm





WARNING: Be prepared to collect escaping fluid.

CAUTION: If brake fluid is spilt on the paintwork, the affected area must be immediately washed down with cold water.

Torque to: 14 Nm





Torque to: 25 Nm









WARNING: Be prepared to collect escaping fluid.









For additional information, refer to Coolant Expansion Tank Service and Repair









Torque to: 7 Nm





Torque to: 10 Nm








Bolt: 10 Nm

Right-hand drive vehicles





WARNING: Be prepared to collect escaping fluid.

Vehicles with fuel fired booster heater





All vehicles





Installation
1 To install, reverse the removal procedure.