Adaptive Damping Module [2-Door]

Adaptive Damping Module

Removal
1 Remove the rear seat backrest. For additional information, refer to Rear Seat Backrest Rear Seat Backrest




2 Remove the active damping module.
- Remove the 4 nuts.
- Disconnect the 2 electrical connectors.

Installation
1 Install the active damping module.
- Tighten the nuts to 10 Nm (7 lb.ft).
- Connect the electrical connectors.
2 Install the rear seat backrest. For additional information, refer to Rear Seat Backrest Rear Seat Backrest