Headlamp

CAUTION: DTC B2503 and B2504 cannot be detected before the swivel operation. Thus, perform swivel operation first, and then check the display in self-diagnostic results.













Description of DTC and Solutions after Detection

CAUTION:
- If DTC relating to CAN communication [U1000] and other components are displayed at the same time, diagnose CAN communication first.
- Make sure of the normal operation after the parts (except AFS control unit) replacement according to the self-diagnosis results. Delete the malfunction history.

Display Results
- 0: There is a malfunction now.
- 1 - 39: Displays when it is normal at present and finds malfunction in the past. It increases in order of 0-> 1-> 2...38-> 39 after returning to the normal condition whenever IGN OFF- ON. If it is over 39, it is fixed to 39 until the self-diagnostic results are erased. It returns to 0 when malfunction is detected again in the process.