Tightening and Torques Sequences

CYLINDER HEAD







Torque the cylinder head bolts in sequence to 29 Nm (3.0 kg-m, 22 lb-ft), use a beam-type torque wrench. When using a preset-click-type torque wrench, be sure to tighten slowly and do not overtighten. If a bolt makes any noise while you are torquing it, loosen the bolt and retighten it from the first step.

Tighten all cylinder head bolts an additional 130 °

Intake Manifold Service and Repair

Camshaft Bearing Cap Rocker Arm Assembly and Camshaft Installation

Camshaft Pulley/Gear Camshaft Sprocket Installation