Camshaft Sprocket Installation

Camshaft Sprocket Installation

NOTE: Keep the cam chain away from magnetic fields.

1. Install the cam chain around the camshaft sprocket aligned with the reference mark (A), then install the camshaft sprocket on the camshaft.






2. Hold the camshaft with a 27 mm open-end wrench, then tighten the bolt.

NOTE: Apply new engine oil to the bolt threads and flange.










3. Apply new engine oil to the sliding surface of the cam chain tensioner through the oil return hole in the cylinder head.






4. Hold the crankshaft pulley and set the socket wrench (A) on the camshaft sprocket bolt.





5. Turn the camshaft clockwise to compress the cam chain tensioner, then remove the 6 x 1.0 mm bolt (B).

NOTE:

- The turning torque should not exceed 44 Nm (4.5 kg-m, 33 lb-ft) when turning the camshaft.
- Do not turn the camshaft counterclockwise.

6. Install the maintenance bolt (C) with a new washer (D).

7. Install the new cylinder head plug.





8. Install the cylinder head cover Cylinder Head Cover Installation.