Installation

INSTALLATION





1. Install the seat adjuster (1) onto the seat cushion frame and install the bolts (2). Tighten the bolts to 28 Nm (21 ft. lbs.).




2. Install the rear seat adjuster bolts (3) and tighten the bolts to 28 Nm (21 ft. lbs.).
3. Install the child restraint anchorage bar and install the bolts (if equipped). Tighten the bolts to 28 Nm (21 ft. lbs.).
4. Install the j-strap over the child restraint anchorage bar (if equipped).




5. Install the seat back and recliner assembly onto the seat cushion frame Installation.




6. Position the seat cushion cover flaps back and install the recliner handle (4) and screw (3).
7. Install the seat.Installation

WARNING: Do not connect the battery negative cable. Serious or fatal injury may result if the system test is not performed first. Testing and Inspection

8. Place battery access cover into place and install four bolts.
9. Close deck lid.