VTSS Will Not Arm

*VTSS WILL NOT ARM

For a complete wiring diagram Consult Diagrams/Electrical





Diagnostic Test

1. CHECK THE BCM FOR DTCS
Ensure both doors are closed.
With the scan tool check the following:
Read the active BCM DTC's.
Check that the driver and passenger door ajar switch states display open with the doors closed.
Check that the Ignition Status displays Lock with the ignition key in the Lock position.
Were there any problems found?

Yes

- Diagnose using the appropriate procedure.
- Perform VTSS VERIFICATION TEST - VER 1. Vehicle Theft Security Verification Tests

No

- Replace the Body Control Module.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test