Sun Shade: Service and Repair

Sunroof Sunshade Replacement

Removal Procedure

1. Remove the sunroof window. Refer to Sunroof Glass Panel Replacement (Service and Repair).




2. Remove the screws (1) from the rear water trough.
3. Rotate the trough toward the rear to remove it from the hold down.
4. Remove the water trough.




5. Remove the sunshade by bowing the sunshade in the center and pushing the sunshade to one side to allow the opposite side to be lifted out of the sunshade channel.




6. Remove the sunshade from the sunroof module.

Installation Procedure

1. Position the sunshade to the sunroof module




2. Insert one side into the guide channel on the sunroof module.
3. Push the sunshade up so that it bows and the other side can be positioned into the opposite guide channel.
4. Slide the sunshade forward and backward to check for smooth operation.




5. Position the water trough in the hold downs and rotate it toward the front.

Notice: Refer to Fastener Notice in Cautions and Notices.

6. Install the screws (1) on the rear water trough.

Tighten the screws to 2 Nm (18 lb in).

7. Install the sunroof window. Refer to Sunroof Glass Panel Replacement (Service and Repair).