Sunroof / Moonroof Panel: Service and Repair

Sunroof Glass Panel Replacement

Removal Procedure

1. Position the sunshade fully open.
2. Place the sunroof window in the vent position.




3.
Remove the 4 sunroof screws (2 on each side).
4. Remove the sunroof window from the module.

Installation Procedure

1. Position the sunroof window in the module. Ensure that the information logo stencil is toward the rear of the opening.





Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the sunroof window screws.

Tighten the screws to 4 Nm (35 lb in).

3. Adjust the sunroof window. Refer to Sunroof Window Height and Opening Fit Adjustment (Adjustments).
4. Open and close the sunroof window in order to test the fit of the window.