Battery Jump Start Terminal and Positive Terminal Overview

Battery Jump Start Terminal and Positive Terminal Overview

Observe notes on contact corrosion. Refer to=> [ Contact Corrosion ] Contact Corrosion.






1 Screw

• 10 Nm

2 Screw

3 Screw

• 4.5 Nm

4 Battery Jump Start Terminal (U6)

• Positive terminal grip with wiring harness.

• Removing and installing, refer to => [ Battery Jump Start Terminal (U6) ] Battery Jump Start Terminal (U6).

5 Battery Jump Start Pin

• Negative terminal clamp.

• Tightening specification, refer to item 8 => [ Battery Jump Start Pin ] Engine Compartment E-Box, Wire Junction, Fuse Holder and Battery Overview.

6 Positive Cable

• From the battery.

7 Nut

• 20 Nm

8 Positive Cable

• 8 Nm

9 Washer

10 Screw

• 4 Nm

11 Mount

• For the battery jump start terminal (U6).

12 Negative Wire

• To transmission.

13 Terminal B+

• To the starter.

14 Terminal 30/B+

• To the generator.

15 Ground Wire

• To the fuse panel at the front.

• Tightening specification, refer to=> [ Tightening Specification: Fuse Panel ] Engine Compartment E-Box, Wire Junction, Fuse Holder and Battery Overview.

16 Terminal 30

• To the fuse panel at the front.

• Tightening specification, refer to=> [ Tightening Specification: Fuse Panel ] Engine Compartment E-Box, Wire Junction, Fuse Holder and Battery Overview.

17 Washer

18 Screw

• 10 Nm

19 Mount

• For the wiring harness.