Drive Plate Overview

Drive Plate Overview

• For assembly work, secure the engine on the engine and transmission holder (VAS 6095). Refer to => [ Engine, Securing to Engine and Transmission Holder ] Procedures.






1 Drive Plate

• With the bearing flange

• Check the running surfaces on the bearing flange and the clutch module holes for cracks and signs of wear.

• Removing and installing, refer to => [ Drive Plate ] Drive Plate

2 Bolt

• Replace

• 60 Nm + 90° turn

3 Needle Bearing

• Installation position: Closed side faces the engine

• Removing and installing, Refer to => [ Needle Bearing on Drive Plate ] Needle Bearing on Drive Plate

4 Sensor Wheel

• For Engine Speed (RPM) sensor (G28)

5 Crankshaft

6 Fitting Pin

7 Shaft Seal

• For the crankshaft, transmission side

• Removing and installing, refer to => [ Crankshaft Seal ] Service and Repair.