Rear Bulkhead Trim

Rear Bulkhead Trim

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)





Removal





- Remove the rear bulkhead end trim. Refer to => [ Rear Bulkhead End Trim ]. Rear Bulkhead End Trim

- Remove rear shelf. Refer to => [ Rear Shelf ]. Rear Shelf

- Unclip the rear bulkhead trim with the (3409) - arrows - and remove it.

Installation

Installation is reverse of removal, but note the following:

• If the trim clips stay in the body mounting points, remove them and insert them in the trim.

• Check the clips for damage or deformation and replace them if necessary.

- Press the rear bulkhead trim into the body mounting points as far as the stop.