Rear Bulkhead End Trim

Rear Bulkhead End Trim

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)





Removal





- Move the seats as far forward as possible and fold the backrests forward.

- Unclip the rear bulkhead end trim with the (3409) - arrows - and remove it.

Installation

Installation is reverse of removal, but note the following:

• If the trim clips stay in the body mounting points, remove them and insert them in the trim.

• Check the clips for damage or deformation and replace them if necessary.

- Press the rear bulkhead end trim into the body mounting points as far as the stop.