Transmission

Operation number: 43710-2

Transmission

Removal

Note! Removal steps in this procedure may contain installation details.

Remove Accessory Drive Component Bracket Refer to: Accessory Drive Component Bracket, B6324S5, B6324S4 Service and Repair

Remove the following items:
- Engine support insulator left Refer to: Engine support insulator left, B6304T4, TF-80SC AWD, B6324S4, TF-80SC, B6324S5, TF-80SC, B6324S5, TF-80SC AWD Engine Support Insulator Left
- Front subframe Refer to: Front subframe, B6304T4, TF-80SC AWD, B6324S4, TF-80SC, B6324S5, TF-80SC, B6324S5, TF-80SC AWD Service and Repair
- Driveshaft left Refer to: Driveshaft left, B6304T4, TF-80SC AWD, B6324S4, TF-80SC, B6324S5, TF-80SC, B6324S5, TF-80SC AWD Driveshaft Left
- Drive shaft right Refer to: Drive shaft right, B6304T4, TF-80SC AWD, B6324S4, TF-80SC, B6324S5, TF-80SC, B6324S5, TF-80SC AWD Driveshaft Right

Torque: M6, 10 Nm

Remove the following items:
1. Torque: M10, 50 Nm

2. Torque: M8, 24 Nm

Warning! Be prepared to collect escaping fluid.

Caution! Make sure that all openings are sealed. Use new blanking caps.

Remove the following items:
1. Torque: M8, 24 Nm

2. Torque: M10, 50 Nm

3. Torque: M6, 10 Nm

Remove the following items:
- starter motor Refer to: Starter motor, B6304T4, B6324S5, B6324S4 Service and Repair
- Crankshaft front seal Refer to: Crankshaft front seal, B6304T4, TF-80SC AWD, B6324S4, TF-80SC, B6324S5, TF-80SC, B6324S5, TF-80SC AWD Service and Repair

999 7257 Wrench 999 7257 Wrench
Torque: Torque converter to flexplate (screw), 60 Nm

998 5972 JACK 998 5972 Jack 999 5972 FIXTURE 999 5972 Fixture 999 5463 FIXTURE 999 5463 Fixture 999 7351 Fixture 999 7351 Fixture

999 5682 Tensioner band 999 5682 Tensioner B and

Torque: M10, 50 Nm

Note! This step is only necessary when installing a new component.

Torque: M12, 80 Nm

Note! This step is only necessary when installing a new component.

Torque: M8, 24 Nm

Installation

Perform transaxle, preparations before installing Refer to: Transmission, preparations before installing, B6304T4, TF-80SC AWD, B6324S4, TF-80SC, B6324S5, TF-80SC, B6324S5, TF-80SC AWD Transmission, Preparations Before Installing

To install, reverse the removal procedure.

Carry out: gearbox oil level - check Refer to: Transmission oil level - checking, B6304T4, TF-80SC AWD, B6324S4, TF-80SC, B6324S5, TF-80SC, B6324S5, TF-80SC AWD Checking Oil Level

Note! This step is only necessary when installing a new component.

Order and download appropriate software Programming and Relearning