Lumbar Support Backrest Cushion, Replacing

Lumbar support backrest cushion, replacing

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur.
However, the essential information in the illustrations is always correct.

Removal

Removing the lumbar support





Remove:
- the front seat. See: Front seat, replacing Front Seat, Replacing
- the backrest cushion upholstery. See: Upholstery back rest, replacing, Executive Upholstery Back Rest, Replacing
- the protective pad. It is secured with 4 hidden clips.




- the 4 x half moon clips. Remove the padding from the backrest.




- the 2 x mounting screws from the side of the backrest
- the hooks, 3 on each side.
Detach the mechanical cables, 1 on each side.
Remove the lumbar support.

Installation

Note! For tightening torques, see: Tightening torque [1][2]Body and Frame.

Installing the lumbar support

Install:
- the lumbar support
- the 2 mounting screws. Tighten
- the mechanical cables, 1 on each side
- the hooks, 3 on each side
- the padding using the 4 half moon clips
- the protective pad
- the backrest cushion upholstery. See: Upholstery back rest, replacing, Executive Upholstery Back Rest, Replacing.
Tension the lumbar support.
Install the front seat. See: Front seat, replacing Front Seat, Replacing.