Checking Components and Wiring

Checking Components And Wiring







- Ignition off
- Disconnect the engine control module (ECM).

HINT: The fuel temperature sensor is integrated in the fuel pressure sensor.

Check the signal cable with regard to short circuit to supply voltage. Check the signal cable with regard to open circuit.

Take readings between control module terminal #A46 (#A46) and fuel pressure sensor terminal #2.

Remedy as necessary.

Other Information
- Connecting the breakout box
- Signal specification, engine control module (ECM)
- Fuel pressure and temperature sensor, replacing
- Checking wiring and terminals

Continue: Refer to Verification. Verification