T-Pipe, Connection to Oil Cooler

T-pipe, connection to oil cooler

Special tools:
999 2531 Manometer 999 2531 Manometer
999 7002 Adapter automatic gearbox 4T65E 999 7002 Adapter Automatic Gearbox 4T65E

Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the essential information in the illustrations is always correct.

Diagnostic testing of the lock-up function in the control system




Measure the pressure by connecting the T piece between the oil cooler and the return hose.

Tools:
Oil pressure gauge 999 2531 Manometer 999 2531 Manometer
T pipe (adapter) 999 7002 Adapter automatic gearbox 4T65E 999 7002 Adapter Automatic Gearbox 4T65E

Preparations
For transmission temperature, see VIDA vehicle communication.
Connect the pressure gauge hose to the T piece.
Tighten the screw. Tighten to 25 Nm.




Remove the air cleaner (ACL) housing.
Disconnect the oil pipe from the oil cooler.
Collect any oil that flows out.




Connect the T piece to the oil cooler (push it into place).
Connect the oil hose to the T piece.