Front Sill Trim Panel

Front sill trim panel

Removing the front sill trim panel and screw





Remove:
- the two screws
- the sill trim panel carefully.

Removing the sill trim panel and mounting clamps




Press the lock tabs inwards using weatherstrip tool 981 4071 STRAIGHTENING TOOL 981 4071 Straightening Tool and release the sill trim panel by carefully pulling upwards.

Installing the front sill trim panel and screw
Check the plastic nuts on the bodywork.

Install:
- the sill trim panel
- the two screws.

Installing the sill trim panel with mounting clamps
Position the sill trim panel. Press the panel into place.
Check that the lock tabs are fully engaged.