Removal and Replacement

Replacing the canister purge (CP) valve

Location of the canister purge (CP) valve
The canister purge (CP) valve is located on the upper left hand side of the radiator.

Removing the canister purge (CP) valve




- Turbocharged engines: Remove the splash guards over the engine.
- Disconnect the connector.
- Make a note of the routing of the air hoses.
- Press the catch together. Lift off the valve.
- Turbocharged engines: lift the catch upwards. Lift the valve off upwards.
- Remove the clamps. Remove the hoses.

Installing the canister purge (CP) valve




- Position the hoses as illustrated.
- Connect the hoses. Install the clamps.
- Reinstall the unit on the bracket. Ensure that the catches engage.
- Reconnect the connector.
- Turbocharged engines: reinstall the splash guards over the engine.
Start the engine. Read off any diagnostic trouble codes (DTCs).