Replacing the Seat

Replacing the seat

Removal




- Remove the belt from the seat. See Seat belt buckle end mounting Seat Belt Buckle End Mounting
- Move the seat to the front position
- Remove the 4 rear screws.




- Move the seat to the rear position
- Remove the front screws
- Fold the seat backwards
- Cut off the clamps from the wiring
- Take out and separate the connectors
- Lift the chair out of the car.

Installation
In reverse order
Tighten the screws for the seat. Tighten to 25 Nm.

Note! Thread sealant115 1053must be applied to the screws for the seat and turn table.