Removing/Fitting The Rear Pulse Wheel

Replacing the rear pulse wheel

Removal

Removing the wheel hub
Switch off the ignition.
Remove the wheel hub according to Replacing rear wheel hubs Replacing Rear Wheel Hubs

Replacing the rear pulse wheel




- Remove the 2 screws
- Remove the pulse wheel.

Installation

Installing the wheel hub, brake caliper and wheel
- Clean the hub. Install the new pulse wheel
- Tighten to 25 Nm
- Install the wheel hub, the brake caliper and wheel according to Replacing rear wheel hubs Replacing Rear Wheel Hubs.

Final check
- Read off and erase any diagnostic trouble codes (DTCs)
- Test drive the car according to Test driving Initial Inspection and Diagnostic Overview
- Check whether any diagnostic trouble codes (DTCs) have been stored. Read off any stored DTCs.