C3 Checking Supply (30) to Fuse 2)

C3 Checking supply (30) to fuse 2 in the central fuse module in the passenger compartment.




- Switch off ignition.
- Connect a voltmeter between ground and fusebox pos. 11C/2:2 for fuse 2.
The voltmeter should indicate battery voltage.

If value is OK:
- Continue to C4. C4 Checking Supply (15) to Fuse 11

If the reading is incorrect:
Open circuit or short circuit in supply cable between fusebox pos. 11C/2:2 and battery 1/1.
- Correct fault or replace cable.
Replace the fuses.