Checking Signal [GC2]

Checking Signal





- Ignition off.
- Connect test box and check ground points as per JA. Connecting test box. Connecting Test Box [JA]
- Disconnect control module.
- Ignition on.

Connect a voltmeter between #1 and #44 on test box.

Voltmeter should read approx. battery voltage.

If reading is OK:
- Check TRACS warning indicator GC5. Checking (TRACS) Warning Indicator [GC5]

If reading is incorrect:
- Check hydraulic unit connector GC3. Checking Hydraulic Unit Connector [GC3]