Ribbed Belt Pulley on Generator

Ribbed Belt Pulley on Generator

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1332)

• Socket (VAS 3310)

Removal

- Remove generator. Refer to => [ Generator ] Generator.

- Tighten the generator in a vise at the mounting points.

- Use the (VAS 3310) to remove the ribbed belt pulley nut from the generator shaft.






Installation

Install in reverse order of removal. Note the following:

- Tighten the threaded connection between the ribbed belt pulley and generator shaft 65 Nm.