Windshield Wiper Motor, Removing from Wiper Frame

Windshield Wiper Motor, Removing from Wiper Frame

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1331/)

- In vehicles starting with 11.07, deactivate the Alternating Park Position (APP function), refer to => [ Wiper Motor APP Functions, Deactivating Starting 11.07 ] Testing and Inspection.

• If during a repair a windshield wiper linkage with part number 7L0.955.601.B/ 602.B or higher is installed on a Touareg through MY 2007 (CW 22/07), the plenum chamber cover must also be replaced. Use plenum chamber cover 7L6.819.401.K 9B9, one a cover with a higher index number.

- Remove the wiper frame with linkage and windshield wiper motor, refer to=> [ Wiper Frame with Linkage and Windshield Wiper Motor, Removing ] Wiper Frame with Linkage and Windshield Wiper Motor (V), Removing

- Remove hex nut - 1 -.






- Remove crank - 2 - from wiper motor shaft.

- Remove mounting bolts - arrows - for windshield wiper motor.






- Remove windshield wiper motor from wiper frame.

• If Wiper motor control module (J400) or Windshield Wiper Motor (V) is replaced, Wiper motor control module must be coded. Refer to => [ Wiper Motor Control Module, Coding ] Testing and Inspection.