Turbocharger Air Intake Hose: Service and Repair

Hose Connections with Connector Couplings


The connector coupling sealing ring can be damaged if the securing clamp is in the locked position when installing. This would result in a leak. Follow the assembly instructions.

Removing

- Release the connector coupling by pulling the locking clip - arrow -. Separate the hose/pipe without assistance from tools.






Installing

- When replacing the sealing ring, lay the ring in the charge air hose groove. Ensure the gasket is completely seated in the groove all the way around.

- Oil the sealing surfaces and sealing ring.

- Bring the securing clip into the released position - 1 -.

- Slide the charge air hose onto the pips as far as the stop.

- Bring the securing clip into the locked position - 2 - and then press the charge air hose back again.






- Check for correct seating and proper locking of the connector by pulling on the hose.