Storage Compartment With USB Connection

Storage Compartment with USB Connection

The storage compartment with USB connection is installed in the glove compartment.

Special tools, testers and auxiliary items required

• (3316) Radio removal tool

• Radio Removal Tool (3316) is made up of two identical parts.

Removing

Before starting repair work, perform the following:

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Remove storage media and their wire connections from the USB connection as necessary.

- Remove glove compartment from passenger side.

- Remove glove compartment with USB connection installed from instrument panel.

- Disconnect harness connector - A - on glove compartment and remove cable ties - arrows -.





- Pull on the tab in glove compartment and storage compartment with installed USB connection is lowered.

- Slide radio removal tools (3316) into slots designed for them on storage compartment with USB connection - arrows - at left and right until they engage audibly.





For the sake of clarity, the storage compartment is depicted in the removed state for the following work step.

- Push extracting tools apart in - direction of arrow - so that the locking mechanism disengages easily. Then pull the complete insert out of glove compartment with extracting tools pressed.





- Guide disconnected wire connection through the glove compartment.

- Push the spring on the removed insert in - direction of arrow - and while doing so pull extracting tool out in - direction of arrow A -.





Installing

- Slide storage compartment into installation frame of glove compartment and when doing this guide wire connection upward through opening in glove compartment.

- Now slide storage compartment in further until it engages audibly.

- Secure harness connector - A - at top on glove compartment with two cable ties - arrows -, make sure no flapping noises can occur. Cut off excess lengths of cable ties.





- Reconnect connectors.

- Reinstall glove compartment.