Ignition Coil: Service and Repair

Ignition Coils with Power Output Stages

Special tools, testers and auxiliary items required

• Puller (T10095 A)

• Assembly tool (T10118)

Removing

- Remove the ignition coil wiring harness cover strip - in direction of arrow -.





- Place assembly tool (T10118) on locking button - arrow - and carefully pull down harness connector.





- Slide on Puller for ignition coil (T10095 A) from straight connector side in - direction of arrow - and pull out ignition coil with power output stage.





Installing

- To install, insert ignition coil with power output stage into corresponding spark plug shaft so that straight connector sides fit with each other - arrows -.





- Slide on Puller for ignition coil (T10095 A) from straight connector side in - direction of arrow - and press ignition coil with power output stage on to spark plugs.