Brake Lamp: Service and Repair

High-Mount Brake Lamp

• Washer nozzle of rear window wiper is a component of High-mount Brake Lamp (M25) and cannot be adjusted.

• If spray nozzle sprays unevenly or does not spray the wiper area, replace High-mount Brake Lamp (M25) with spray nozzle (repair measure).

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Release cover - arrow - from locking mechanisms.





- Remove nuts - arrows -.





- Lift rear spoiler with High-mount Brake Lamp (M25) and disconnect 2-pin harness connector - 1 -.





- Disconnect hose connection - arrow - to wash of rear window wiper.

- Store the rear spoiler with High-mount Brake Lamp (M25) on an appropriate surface.

- Remove bolts - 2 -.

- Clip High-mount Brake Lamp (M25) - 1 - in - direction of arrow - out of locking mechanisms - 2 -.





Installing

Install in reverse order of removal, noting the following:

• When installing rear spoiler with High-mount Brake Lamp (M25), make sure that hose (Velcro connection) to wash of rear window wiper and line (Velcro connection) to High-mount Brake Lamp (M25) are fitted properly.