Wire Routing, Connectors and Bracket on Valve Body

Wire Routing, Connectors and Bracket on Valve Body

In this chapter the information regarding working on the solenoid valves is shown in illustrations.

Wiring Routing and Connectors





1 - Solenoid Valve 4 (N91)

• Wiring colors to the valve: green/brown.

2 - Solenoid Valve 6 (N93)

• Wiring colors to the valve: green/gray.

3 - Solenoid Valve 5 (N92)

• Wiring colors to the valve: yellow/purple.

4 - Solenoid Valve 9 (N282)

• Wiring colors to the valve: red/blue.

5 - Solenoid Valve 10 (N283)

• Wiring colors to the valve: white/black.

6 - Solenoid Valve 3 (N90)

• Wiring colors to the valve: green/blue.

7 - Solenoid Valve 1 (N88)

• Wire color to the valve: white.

8 - Solenoid Valve 2 (N89)

• Wire color to the valve: black.

A - Transmission Output Speed (RPM) Sensor (G195) Connector

• Wire color to the sensor: blue/orange.

B - Transmission Input Speed (RPM) Sensor (G182) Connector

• Wire colors to the sensor: white/red.

Bracket for Connectors, Securing the Wires





1 - Bracket for the Transmission Output Speed (RPM) Sensor Connector

• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.

2 - Bracket for the Transmission Input Speed (RPM) Sensor Connector

• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.

3 - Transmission Fluid Temperature Sensor (G93)

• Wire colors on the sensor: orange/orange.

4 - Selector Lever

• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.

Arrows -

• The wires are attached here.