Oil Pan: Service and Repair

Oil Pan, Assembly Overview

• The oil pan (upper and lower part) can only be removed or installed with the oil filter housing removed --> [ Oil Filter Housing, Assembly Overview ] Service and Repair.





1 Oil pump

• Removing and installing --> [ Oil Pump ] Oil Pump

2 Pipe connection

3 10 Nm

4 Chain tensioner

• Before removing, secure using locking pin (T40011).

5 10 Nm

6 Chain sprocket

• Note installation position --> [ Installation position of chain sprocket for oil pump drive ]

7 34 Nm

8 Drive chain

• For oil pump

• Removal of drive chain --> [ Oil Pump Drive Chain ] Oil Pump Drive Chain

9 30 Nm

10 Oil pan, upper part

11 Oil pan, lower part

12 10 Nm

13 Oil Level Thermal Sensor (G266)

14 10 Nm

15 Oil drain plug, 50 Nm

• For oil pan, lower part

16 Seal

• Replace

17 15 Nm

18 Oil drain plug, 50 Nm

• For oil pan, upper part

19 22 Nm

20 Seal

• Replace

21 10 Nm

22 25 Nm

23 Oil intake tube

• For oil sump in upper part of oil pan

Installation position of chain sprocket for oil pump drive





- Set chain sprocket with flattened side - arrow - onto oil pump shaft. The text on the chain sprocket faces toward front.