Rocker Arm Assembly: Service and Repair

Roller Rocker Lever

Special tools, testers and auxiliary items required

• Torque wrench (5 to 50 Nm) (V.A.G 1331)

Work procedure

- Remove engine --> [ Engine, Removing ] Engine Removing.

- Remove camshafts with camshaft adjusters --> [ Camshafts and Camshaft Adjusters ] Service and Repair.

- Mark allocation of roller rocker lever and roller rocker lever shafts for re-installation.

- Remove bolts - arrows -.





- Then, install an M6 bolt into holes of the shafts and pull shafts out of cylinder head.

- Remove roller rocker levers.

• Always replace the O-rings of the shaft when installing.

• Oil the bearing areas of the roller rocker levers.

- When installing, tighten bolts of shaft to 10 Nm.

The rest of assembly is in reverse order of disassembling.