Shift Mechanism

Shift Mechanism

Lubricate bearing areas and slide surfaces with grease ( G 000 450 02).





1 Selector lever handle

• Removing and installing => [ Selector Lever Handle ] Selector Lever Handle

2 Sleeve

• Engages in selector lever handle

• Locks removal of selector lever handle

3 Cover

• With symbol insert

• Removing and installing => [ Selector Mechanism Cover and Circuit Board ] Selector Mechanism Cover and Circuit Board

4 Printed circuit board

• Can be checked in "Guided Fault Finding" using (VAS 5051)/ (VAS 5052)

• Removing and installing => [ Selector Mechanism Cover and Circuit Board ] Selector Mechanism Cover and Circuit Board

5 Frame

• With cover strips

• Disassembling and assembling => [ Selector Mechanism Frame ] Selector Mechanism Frame

6 Shift mechanism

• Removing and installing => [ Shift Mechanism ] Shift Mechanism

• With integrated Tiptronic Switch (F189) and Selector Lever Sensor System Control Module (J587)

7 Bolt, 6 Nm

• 3x

8 Circlip

9 Nut

10 Shift Lock Solenoid (N110)

• Removing and installing => [ Shift Lock Solenoid ] Service and Repair

• Can be checked in "Guided Fault Finding" using (VAS 5051)/ (VAS 5052)

11 Bolt

12 Seal

13 Locking cable

• For ignition key removal lock

• Must not be kinked

• Removing and installing => [ Locking Cable ] Service and Repair

• Adjusting => [ Locking Cable, Adjusting ] Locking Cable, Adjusting

• Ignition key removal lock, checking function => [ Ignition Key Lock, Checking Function ]

14 Selector lever cable

• Do not bend or kink

• If protective sleeve is damaged, selector lever cable must be replaced

• Checking and adjusting => [ Selector Lever Cable, Checking ] Selector Lever Cable, Checking

• Removing and installing => [ Selector Lever Cable ] Removal and Replacement

• Do not grease cable eyelet and ball socket

15 Cover

• For selector mechanism

• With glued seal

16 Self-locking nut, 10 Nm

• For cover at shift mechanism housing

• 4x

• Always replace