Windshield Washer Fluid Level Sensor

Windshield Washer Fluid Level Sensor

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Remove tank for windshield washer system and headlamp cleaning system --> [ Windshield and Headlamp Washer Fluid Reservoir ] Windshield and Headlamp Washer Fluid Reservoir.

- Disconnect harness connector - 1 - and pull Windshield Washer Fluid Level Sensor (G33) out of its rubber seal.





Installing

Install in reverse order of removal, noting the following:

- Bleed headlamp washer system after completing assembly work --> [ Headlamp Washer System, Bleeding ] Headlamp Washer System, Bleeding.