Instrument Cluster

Instrument Cluster

CAUTION!
When disconnecting and connecting the battery, always perform the work procedure as described in the repair information --> [ Battery, One-Battery Layout, Disconnecting and Connecting ] Battery, One-Battery Layout, Disconnecting and Connecting. Not adhering to sequence will result in the deactivation of Main Battery Switch -E74- and subsequent damage to electrical system components.

• Instrument cluster component functions can be checked On Board Diagnostic (OBD) program function "Output Diagnostic Test Mode (DTM)" --> [ Instrument Cluster Output Diagnostic Test Mode ] Component Tests and General Diagnostics.

• Additional information:

--> Owner's Manual

The following components are integrated in the instrument cluster:

• Instrument Cluster Control Module (J285)

• Data Bus On Board Diagnostic Interface (J533)

• Engine oil temperature display

• Tachometer

• Engine coolant temperature display

• Multifunction indicator (MFI)

• Fuel gauge

• Speedometer

• Voltmeter

• Indicator lamps --> [ Instrument Cluster Indicator Lamp Symbols, through 11.06 ] Instrument Cluster Indicator Lamp Symbols, through 11.06

All warning and indicator lamps are equipped with light-emitting diodes (LEDs) which cannot be serviced or replaced separately. In the event of malfunctions, the complete instrument cluster must be replaced --> [ Instrument Cluster ] [1][2]Component Tests and General Diagnostics.

DTC recognition and display:

The instrument cluster is equipped with On Board Diagnostic (OBD) capabilities which assists with troubleshooting.

For troubleshooting, use Vehicle Diagnostic, Testing and Information System (VAS 5051A) in operating mode " Guided Fault Finding".