Removal

2AZ-FE INTAKE / EXHAUST: INTAKE MANIFOLD: REMOVAL; 2013 MY Corolla [07/2012 -]

1. DISCHARGE FUEL SYSTEM PRESSURE

Service Precautions

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal

4. DRAIN ENGINE COOLANT Service and Repair

5. REMOVE FRONT WIPER ARM HEAD CAP Removal

6. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal

7. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal

8. REMOVE HOOD TO COWL TOP SEAL Removal

9. REMOVE CENTER NO. 1 COWL TOP VENTILATOR LOUVER Removal

10. REMOVE COWL TOP VENTILATOR LOUVER LH Removal

11. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Removal

12. REMOVE OUTER COWL TOP PANEL Removal

13. REMOVE SUSPENSION TOWER DAMPER ASSEMBLY (w/ Front Strut Bar) Removal

14. REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE Removal

15. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

16. REMOVE THROTTLE BODY ASSEMBLY Removal

17. DISCONNECT FUEL MAIN TUBE Removal

18. DISCONNECT NO. 2 VENTILATION HOSE Removal

19. REMOVE FUEL DELIVERY PIPE WITH INJECTOR Removal

20. REMOVE INTAKE MANIFOLD

(a) Disconnect the union to connector tube hose from the No. 2 hose to hose tube.





(b) Disconnect the camshaft timing oil control valve connector.

(c) Remove the wire harness clamp.

(d) Remove the union to connector tube hose from the vacuum hose clamp.

(e) Remove the 5 bolts, 2 nuts and intake manifold.

(f) Remove the gasket from the intake manifold.