Shift Cable: Adjustments

C50 MANUAL TRANSMISSION / TRANSAXLE: TRANSMISSION CONTROL CABLE (for Hatchback): ADJUSTMENT

1. REMOVE REAR CONSOLE BOX ASSEMBLY

Removal (from 07/2011)

2. ADJUST TRANSMISSION CONTROL SELECT CABLE

(a) Remove the clip and disconnect the control select cable from the floor shift shift lever assembly.

Text in Illustration

(b) Slide the adjuster case cover in the direction shown in the illustration.

Text in Illustration

(d) Install the control select cable to the floor shift shift lever assembly with the clip.

NOTICE:
* Make sure to adjust the length at the neutral shift position.
* Make sure that the lock piece is protruding from the adjuster case.

(e) Gently pull the cable rod toward the rear of the vehicle by hand to pull the cable taut.

(f) Press the lock piece into the adjuster case and lock it.

(g) Slide the adjuster case cover in the direction shown in the illustration.

Text in Illustration

NOTICE:
Slide the cover past the protrusion portion of the lock piece.

3. INSTALL REAR CONSOLE BOX ASSEMBLY

Installation (from 07/2011)