Installation (from 07/2011)

STEERING GEAR / LINKAGE: STEERING GEAR (for Hatchback): INSTALLATION

1. INSTALL MANUAL STEERING GEAR

(a) Install the manual steering gear onto the front suspension crossmember with the 2 bolts and 2 nuts.

Torque : 96 Nm (979 kgf-cm, 71 ft-lbf)

NOTICE:
Keep the nut from rotating while turning the bolt.

2. INSTALL NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY

(a) Install the No. 1 steering column hole cover sub-assembly to the manual steering gear.

3. INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

Installation (from 07/2011)

4. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

Front Wheel Alignment (for Hatchback) (from 07/2011)