Front Passenger Side Seat Belt Warning Light Malfunction (from 07/2011)
SEAT BELT: SEAT BELT WARNING SYSTEM (for Hatchback): Front Passenger Side Seat Belt Warning Light Malfunction
- Front Passenger Side Seat Belt Warning Light Malfunction
DESCRIPTION
The occupant classification ECU detects the state of the front seat inner belt assembly RH and load sensor when the front passenger side seat is occupied with the ignition switch ON. If the front passenger side seat belt is not fastened, the front passenger side seat belt warning light on the combination meter assembly blinks. If the seat belt is fastened, the warning light turns off.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1. CHECK DTC OUTPUT (CAN COMMUNICATION SYSTEM)
(a) Clear the DTC.
* for Hatchback except Separate Type Yaw Rate Sensor Diagnosis System (from 07/2011)
* for Hatchback with Separate Type Yaw Rate Sensor Diagnosis System (from 07/2011)
(b) Recheck for DTCs.
Result
B -- GO TO CAN COMMUNICATION SYSTEM Diagnosis System (from 07/2011)
C -- GO TO CAN COMMUNICATION SYSTEM Diagnosis System (from 07/2011)
A -- Continue to next step.
2. CHECK DTC OUTPUT (OCCUPANT CLASSIFICATION SYSTEM)
(a) Clear the DTC Reading and Clearing Diagnostic Trouble Codes.
(b) Recheck for DTCs.
Result
B -- GO TO OCCUPANT CLASSIFICATION SYSTEM Occupant Classification System (for Hatchback)
A -- Continue to next step.
3. CHECK DTC OUTPUT (AIRBAG SYSTEM)
(a) Clear the DTC.
* for Hatchback with VSC/Built-in Type Yaw Rate Sensor Airbag System (for Hatchback with VSC/Built-in Type Yaw Rate Sensor)
* for Hatchback with VSC/Separate Type Yaw Rate Sensor Airbag System (for Hatchback with VSC/Separate Type Yaw Rate Sensor)
* for Hatchback without VSC Airbag System (for Hatchback without VSC)
(b) Recheck for DTCs.
Result
B -- GO TO AIRBAG SYSTEM Airbag System (for Hatchback with VSC/Built-in Type Yaw Rate Sensor)
C -- GO TO AIRBAG SYSTEM Airbag System (for Hatchback with VSC/Separate Type Yaw Rate Sensor)
D -- GO TO AIRBAG SYSTEM Airbag System (for Hatchback without VSC)
A -- REPLACE COMBINATION METER ASSEMBLY Removal (from 07/2011)