Installation (from 07/2011)

1NZ-FE ENGINE MECHANICAL: DRIVE BELT (for Hatchback): INSTALLATION

1. INSTALL FAN AND GENERATOR V BELT

(a) Provisionally install the fan and generator V belt onto each pulley.

NOTICE:
* Make sure that there is no foreign matter or liquid, such as oil, on the belt and pulleys.
* Make sure that the V belt is securely fitted into the rib grooves of the pulley.

2. ADJUST FAN AND GENERATOR V BELT

(a) Insert an adjusting bar between the engine mounting bracket and generator assembly. Pull the adjusting bar toward the vehicle front to adjust the generator V belt tension.





Text in Illustration





NOTICE:
Do not insert the adjusting bar between the camshaft timing oil control valve assembly and generator assembly. It could damage the camshaft timing oil control valve assembly.

(b) First tighten bolt A, then tighten bolt B.





Torque : 19 Nm (189 kgf-cm, 14 ft-lbf) for bolt A

Torque : 54 Nm (551 kgf-cm, 40 ft-lbf) for bolt B

3. INSPECT FAN AND GENERATOR V BELT Testing and Inspection

4. INSTALL ENGINE UNDER COVER RH

Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)