Fuel Receiver Gauge Malfunction (from 07/2011)

METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM (for Hatchback): Fuel Receiver Gauge Malfunction
- Fuel Receiver Gauge Malfunction

DESCRIPTION

* The combination meter assembly controls the fuel receiver gauge in accordance with the resistance of the fuel sender gauge, which varies depending on the amount of fuel remaining in the fuel tank.

WIRING DIAGRAM

Refer to DTC B1500 B1500.

INSPECTION PROCEDURE

PROCEDURE

1. CONFIRM DTC OUTPUT

(a) Check DTC Reading and Clearing Diagnostic Trouble Codes.

Result





B -- GO TO DIAGNOSTIC TROUBLE CODE CHART Meter / Gauge System (for Hatchback)
A -- Continue to next step.

2. PERFORM ACTIVE TEST USING TECHSTREAM (FUEL METER OPERATION) B1500

NG -- REPLACE COMBINATION METER ASSEMBLY Removal (from 07/2011)
OK -- Continue to next step.

3. INSPECT FUEL SENDER GAUGE ASSEMBLY B1500

NG -- REPLACE FUEL SENDER GAUGE ASSEMBLY Removal (from 07/2011)
OK -- Continue to next step.

4. CHECK FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY B1500

NG -- REPLACE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY Removal (from 07/2011)
OK -- Continue to next step.

5. CHECK HARNESS AND CONNECTOR (COMBINATION METER ASSEMBLY - FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY) B1500

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- REPLACE COMBINATION METER ASSEMBLY Removal (from 07/2011)