Removal

WIPER / WASHER: WASHER MOTOR (for Front Side): REMOVAL

1. REMOVE FRONT WHEEL RH

2. REMOVE FRONT FENDER OUTSIDE MOULDING RH

HINT
Use the same procedure for the RH side and LH side Removal.

3. REMOVE FRONT FENDER LINER RH

(a) Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.





(b) Remove the 4 clips.





(c) Remove the bolt and 8 screws.

(d) Remove the 3 grommets and front fender liner RH.

HINT
The grommets need to be replaced with new ones because they will break when they are removed.

4. DRAIN WINDSHIELD WASHER FLUID

(a) Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

HINT
Use a container to collect the washer fluid.





5. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

(a) Disconnect the connector.





(b) Remove the windshield washer motor and pump assembly.

HINT
Use a container to collect the washer fluid.