Removal

MF1A TRANSFER / 4WD / AWD: TRANSFER ASSEMBLY: REMOVAL

1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

for 2GR-FE

Removal for 1AR-FE

2. REMOVE FRONT NO. 1 STABILIZER BRACKET LH Removal

3. REMOVE FRONT NO. 1 STABILIZER BRACKET RH

HINT
Perform the same procedure as for the LH side.

4. REMOVE FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY

5. REMOVE STEERING LINK ASSEMBLY Removal

6. REMOVE FRONT FRAME ASSEMBLY (for 2GR-FE) Removal

7. SEPARATE REAR ENGINE MOUNTING INSULATOR ASSEMBLY (for 1AR-FE) Removal

8. REMOVE FRONT FRAME ASSEMBLY (for 1AR-FE) Removal

9. REMOVE STARTER ASSEMBLY (for 2GR-FE) Removal

10. REMOVE STARTER ASSEMBLY (for 1AR-FE) Removal

11. REMOVE MANIFOLD STAY (for 2GR-FE) Removal

12. REMOVE TRANSFER STIFFENER PLATE RH (for 2GR-FE) Removal

13. REMOVE TRANSFER STIFFENER PLATE RH (for 1AR-FE) Removal

14. SEPARATE WIRE HARNESS (for 2GR-FE)

15. SEPARATE WIRE HARNESS (for 1AR-FE) Removal

16. REMOVE FLEXIBLE HOSE BRACKET SUB-ASSEMBLY (for 2GR-FE)

17. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (for 2GR-FE)

18. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (for 1AR-FE) Removal

19. REMOVE TRANSFER ASSEMBLY

(a) Remove the 2 bolts and 6 nuts.





(b) Using a plastic hammer, remove the transfer assembly from the transaxle assembly.

NOTICE:
* Remove the transfer assembly from the transaxle assembly without tilting it.
* During removal, do not hold the transfer assembly by the oil seals on either side of the assembly.