Removal

U760F AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Seat Heater System) Removal

3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Seat Heater System) Removal

4. REMOVE NO. 2 CONSOLE BOX CARPET Removal

5. REMOVE CONSOLE BOX ASSEMBLY Removal

6. REMOVE AIR CONDITIONING CONTROL ASSEMBLY Removal

7. REMOVE FRONT DOOR SCUFF PLATE LH Removal

8. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Removal

9. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL Removal

10. REMOVE FRONT DOOR SCUFF PLATE RH Removal

11. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH Removal

12. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

13. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Removal

14. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

15. REMOVE POSITION INDICATOR HOUSING ASSEMBLY Removal

16. REMOVE CONSOLE BOX SUB-ASSEMBLY Removal

17. REMOVE SHIFT LEVER ASSEMBLY

(a) Move the shift lever to N.

(b) Disconnect the 2 connectors.





(c) Remove the 4 nuts and shift lever assembly.

(d) Disconnect the end of the transmission control cable assembly from the shift lever assembly.





(e) Turn the lock nut counterclockwise. While holding the lock nut, disconnect the transmission control cable from the shift lever retainer.