Removal

1AR-FE COOLING: WATER PUMP: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal

3. REMOVE COOL AIR INTAKE DUCT SEAL Removal

4. REMOVE NO. 1 ENGINE UNDER COVER

5. REMOVE NO. 2 ENGINE UNDER COVER

6. DRAIN ENGINE COOLANT Service and Repair

7. REMOVE V-RIBBED BELT

HINT
Removal

8. REMOVE WIRE HARNESS CLAMP BRACKET Removal

9. REMOVE GENERATOR ASSEMBLY Removal

10. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY Disassembly

11. REMOVE WATER PUMP ASSEMBLY

(a) Remove the 7 bolts, water pump and water pump gasket.